Other Products / Services #5572648

NS-EEG-D1 is a digital EEG device available in 24/36/48/60 channels. It delivers high quality EEG signals through state-of-the-art hardware and software design, built-in impedance test module and anti-interference data transmission technology. This device can be used for routine EEG, Event-Related Potential (ERP) data acquisition and analysis, as well as professional Sleep monitoring using Polysomnography (PSG) for medical and research institutions. System Key Features High quality signal with optical fiber isolation DC battery power operation eliminates AC power line interference Built-in impedance testing function Built-in impedance testing function Ergonomically designed single shielded cup/clip electrodes with touch-proof connectors (1.5mm) Choice of different configurations - 24/36/48/60 channels unipolar EEG 12 channels bipolar EEG Synchronous acquisition, editing and display of EEG and video signals Synchronised EEG examination and PSG recording enable for more sophisticated clinical applications

NS-EMG-C-1 is a digital EMG device. It acquires, stores and review up to 4 channels of EMG data and 2 channels evoked potential (EP) channels. It can perform routine EMG recording, EP, as well as nerve conductive velocity (NCV) diagnostic examination.

Operation Menu :

• Customizable selection of EMG with common nerve/ muscle colour map.
• One key switch function for monitoring EMG, SCV, RNS and F-wave.
• Easy access to waveform data comparison
• Pull-down list structure for easy operation

Guide for Electrode Placement : Easy-to-understand illustration for electrode placement, stimulation position and standard waveform

Case Management Module :

• Easily accessible through search by “Accurate Inquiry” or “Fuzzy Inquiry” for patient case record.
• Ability to replay, review and print reports for past cases

Examination Protocol: EMG :

• Scanning EMG :
  • Ability to replay and analyse stored, scanned waveforms measured multiple times
  • Automatic saving and extraction of data and result.

• Motor Unit Potential (MUP) :
  • Automatic scanning of EMG waveform and selection of optimum MUP value
  • Automatic analysis of time limit, square, phase, frequency, etc.
  • Extraction of MUP during collection, display, analysis and replay of EMG signal

• Examination Protocol :
  • Monaural or binaural stimulation: change of stimulation polarity and alternative stimulation
  • Audio signal output: rare wave, dense wave, alternative wave
  • Monocular or binocular stimulation during interval
  • Improved examination efficiency through rapid extract algorithm, efficient data selection and overlay analysis
  • Waveform is marked automatically
  • Dynamic display of examination results in spectrum format

• Examination Protocol :
  • NCV examination procedure is simple. Nerve examination plan can be pre-established.
  • One key switch for nerve switch and lateral switch, and the item can be stored automatically after test.
  • Waveform caching function enables saving of multiple waveforms with the same examination point.
  • With waveform comparison function, saved waveforms can be shown on the same screen.
  • Four-channel synchronised signal acquisition is offered.
  • Dual-screen display is featured, one screen displaying F-Wave/H-wave separately, the other screen displaying overlay.
  • Latency value and graphic amplitude, rapid data observation with measurement lines are displayed.

Neurostyle Brain Exercise Therapy Towards Enhanced Recovery (nBETTER) is a rehabilitation system that detects visualized movements of stroke-affected limbs using Electroencephalography (EEG) based Neuro-feedback to provide visually engaging and mechanical feedback for exercising the brain towards better post-stroke recovery The first Brain Computer Interface (BCI) based Stroke Rehabilitation System in the market With new stroke rehab: Build new motor control pathway in the brain directly. Better can be used as a standalone application or deployed as an intranet or internet application (by putting some modules on the server). The subject’s information, performance parameters and recorded EEG signals are used to give input for neurofeedback.

 

System Key Features :

• Brain-Computer interface (BCI) based Stroke Rehabilitation System
• Configured for rehabilitation in Chronic and Sub-Acute stroke
• Motor Imagery with Virtual Reality (VR) feedback mechanism
• Innovative algorithm that is clinically-tested to detect patient’s motor intent
• Portable and lightweight system
• Suitable for deployment in Hospitals, Rehabilitation clinic, bedside or home

 

System Components :

• Electroencephalograph (EEG)
• Virtual Reality Games
• Physical Feedback Mechanism

20 channel ambulatory eeg wireless bluetooth channel: 19 ch eeg + 1 ch ecg; 1. Event button to mark patient's epilepsy seizure; 2. Plug and play single electrode (din interface). Supports 19 eeg channels plus 1 channel ecg to meet with doctor's clinical requirements; low power consumption, capable of supporting up to 72 hours recording with 4 aa batteries; use of dc power supply eliminates risk of electric shock to patients and prevents signal interference, and removes the need to use ground wire or other shielding features; supports real-time eeg waveform recording and display via wireless bluetooth transmission, or dynamic recording with flash memory card capable of storing up to 2gb of eeg data (data storage capability depends fully on memory card used); fast data uploading capability: data stored in flash memory card via dynamic recording can be quickly transmitted to desktop or laptop computer through usb 2.0usb1.1 interface; single electrodes with touch proof connectors that meets international standard, and can be replaced individually if necessary; event button on the amplifier enables on-the-spot manual event marking of patient's epilepsy seizure during recording; compact design and easy to carry, complete with eeg signal isolation to support maximum patient movement without distortion; optional video system for recording, editing and displaying video images synchronously with eeg signals. Package: 1 carton delivery time: 3-5 days after payment confirmed

main features of 7128w-d36-ep 36 channel eegpsgerprnprofessional eeg amplifier suitable for all standard applications of routine eeg and long term eeg monitoring in the research and clinical areas.configurable in a number of setups according to users needsrn24 channels monopolar eeg;rn12 channels monopolar eeg + 12 channels bipolar eeg;rn24 channels monopolar eeg + 12 channels polysomnography (psg) parameters (including ecg (1 channel with 2 leads), airflow (1 channel), eog (2 channels), emg (3 channels), snore (1 channel), spo2 (1 channel), thoracic abdominal breathing (2 channels), body position (1 channel)) + erp examination.24 bits ad conversion rate, with high sampling rate of up to 8 khz.high quality real-time eeg signal acquisition is transmitted via fiber optical isolation, which shields away interference from power line and other signals, transmitting stable and reliable measurement data at high-speed while greatly ensuring patients safety.amplifier can be operated either by dc power without affecting signal quality.head-box design to access single shielded cupclip electrodes with touch proof connectors (1.5mm).built-in impedance testing function and automatic calibration (for both sine wave and square wave signals).optional video system for recording, editing and displaying video images synchronously with eeg signals. Delivery time 3-5 days after payment confirmed package 1 carton

This is a professional digital eeg device designed and developed to allow cliniciansrnto perform all standard applications of routine eeg and long term eeg monitoring anywhere due to its portable and compact design. rnit also has low power consumption making it capable of supporting up to 72 hours recording with just four aa batteries. rnthis device supports real-time eeg waveform recording and display via wi-fi and dynamic recording with flash memory card. Rnkey featurern rn1.compact design portable and easy to carry. rn2.complete with eeg isolation support maximum patient movement without distortion. rn3.user-friendly operation. rn4.low power consumption capable of supporting up to 72 hours recording with fourrnaa rnbatteries. rn5.supports real-time eeg waveform recording, display via wi-fi. rn6.dynamic recording with flash memory card. rn7.all-in-one electrode cable for easy connection. rn8.use of dc power supply: eliminates risk of electric shock to patientsrn prevents signal interferencern removes the need to use ground wire or other shielding featuresrn rn9.fast data uploading capability stored data in flash memory card can be quickly transferred to the computer through usb2.0/usb 1.1 interface. rn10.optional video system recording, editing and displaying of video synchronously with eeg signals.

specification of nts-2000 2/4 channels emgrnamplifierrnchannels:rn2 /4 channel, dual-fiber signal transmission isolationrnsensitivity:rn0.05v/div - 20 mv/divrnamplitude-frequency characteristic: rn1hz5khzrnnoise: 0.4v (vp-p)rnimpedance :>1000mrncmrr: 110dbrngain amplifier: rn50 times 50 million timesrnmax higher filters frequency:rn50hzrnmin lower filters frequency:rn0.1hzrncontroller (included in operation panel)rna/d conversion rate:rn24bitrnsample rate:rn200 khzrnstimulus frequency:rn0.1-50 hzrnanalysis time: rn1 - 1000msrnsplice time:rn1 5000 timesrncurrent stimulatorrncurrent intensity output range:rn0 100ma, error 10%rnstimulus modes:rnsingle-current stimulator, dual-current stimulatorrnstimulus frequency:rn0.1 hz 100hz, error 10%rnstimulus width:rn501000srnpulse duration error:rn0.05ms, 0.1ms, 0.5ms, 1ms, error 10%rnpulse mode:rnsingle pulse, double pulse, three pulses.

.

featuresrn1. Multi-channel acquisition: optional 8 and 16 channels with high anti-interference capacity; rn2. Real-time wireless data transmission, dynamic data storage suitable for signal acquisition in movement state; rn3. Multiple data processing and analysis reports: standard, fatigue, coordination, average activity, power spectrum, symmetry etc., exportable for further analysis; rn4. Multi-media biofeedback games make training more efficient and no longer boring. Rn5. Non-invasive: no need to insert needle into the detected muscle, and just stick electrodes on the surface of detected musclern rn6. Multiple quantitative assessment: occurrence period, amplitude, rms value and frequency of emg activity potential and all kinds of analysis reports. Rn7. Program modules function: 6 types semg test and reports for different situation, funny semg biofeedback game training; rn8. Human-friendly software: acquisition, display, analysis and reports generating. Rnapplicationsrnthis equipment can be widely used in hospitals, sports science and lab research. 1. Hemiplegia assessment after cerebral palsy and stroke (neurology, rehabilitation department)rn2. Pain assessment, balance function evaluation, neuromuscular disease diagnosisrn3. Scoliosis, torticollis generic program (pediatrics, rehabilitation department):rn4. Feedback muscle training, muscle function/movement evaluation (rehabilitation department):rn5. Fatigue research (rehabilitation department, sports schools, and athletic teams);rn6. Gait analysis (rehabilitation, neurology department):rn7. Kinematics research (sports school). Software introduction rnsoftware modules mainly include case registration, case management, surface emg test item, testing item, surface emg training items, upload dynamically, data conversion, gain calibration, system setup, help and exit.

product descriptionbio-feedback electrotherapy system uses certain intensity of the low-frequency pulses, through a pre-set program to stimulate nerve or muscle, to make muscle tense or relax, which can achieve some kinds of movement of paralyzed muscles and improve or restore muscle functions. Feedback stimulation can show real-time muscle rms waveform histogram and make feedback stimulation therapy by setting thresholds. Combined with specialized pelvic floor assessment methods, template training methods, multi-media biofeedback training and other therapy programs, it can choose different therapy programs according to different stage of therapy. main features 1. Flexible working modes: neuromuscular electrical, emg triggered stimulation, tens, pelvic floor evaluation and training. Surface emg evaluation and multimedia biofeedback, template training.2. Restore nerve and muscle connection, relieve muscle spam, and promote muscle function recovery; combine active and passive stimulation to re-control paralyzed muscles;3. Make use of state-of-the-art surface emg acquisition and analysis technology, get sensitive, accurate and real-time feedback and assist make appropriate assessment and treatment plan;4. Pelvic floor treatment: help patients to recover early the pelvic floor neuromuscular function;5. Convenient, multiple and visual training templates; simple, funny and personalized game training make treatment no longer boring;rnworking modesrn1. Stimulationrnprescription stimulationrnfree stimulationrnfeedback stimulationrntensrn2. Multi-media traininrnrelax trainingrnreinforce trainingrnsynergy trainingrnaccuracy trainingrnendurance trainingrn3. Template trainingrntotal 17 training templatesrn4 surface emgrnevaluation & diagnosisrn5 pelvic floor evaluation

Specificationrn1. Channels: 2 channel electrical stimulation;surface electromyographyrn 1 channel grip/force sensorrn2. Display sensitivity: 1v/div 2000v/div sub-file control;rn3. Amplitude-frequency characteristics: 10 hz 1k hz; rn4. Maximum current pulse intensity: 100ma, steps 1ma;rn5. Pulse output frequency: 1 hz 160hz;rn6. Pulse width: 50s 500s;rn7. Ground noise: 1v (rms);rn8. Cmrr: 110db;rn9. A/d conversion rate: 24bit;rn10. Input impedance: 100 m;rn11. Scanning speed measurement: 100ms/div 5000ms/div time;rn12. Resistance polarization voltage: plus 300mv dc; error: 5%;rn13. Grip sensor measuring range: 0 100kg; maximum error: 10%rn14. Dynamometer measuring range: 0 50kg, maximum error: 20%rnpowerful working modesrn part one:stimulationrn1. Free stimulation --- therapist can set parameters freely to have an individual treatment planrn2. Prescription stimulation --- there are 52 pre-set prescriptions inside which makes manipulation more simplern3. Feedback stimulation --- also called emg triggered stimulation, with manual and automatic threshold control. As an active training (patient involved), it helps recover more quick.4. Tens --- the stimulus blocks pain signals passing along the nerves to the central nervous system. Tens stimulus also stimulates production of endorphinsrn part two:bio-feedbackrn1. Semg --- surface emg muscle evaluationrn2. Multimedia --- this multi-media biofeedback training is a game program which trains ability of relax, reinforce, accuracy and endurance. It makes treatment no boring and tremendously improves patients willingness of active participationrn3. Template --- guide semg signal to move as the templates (over 10 kinds)part three:muscle forcernconnect the dynamometer through wireless bluetooth to have muscle force evaluationrn part four:grab releasern1. Pevaluation --- pinch strength evaluationrn2. Grevaluation --- grasp and release evaluationrn3. Training --- grip and pinch

brief description:rnbio-feedback electrotherapy systemrnneuromuscular electrical, emg triggered stimulation, tensrnpelvic floor evaluation and trainingrnsurface emg evaluationrnmultimedia biofeedback and template trainingrndescription of bio-feedback electrotherapy systembio-feedback electrotherapy system (model myopfr) use certain intensity of the low-frequency pulses, through a pre-set program to stimulate nerve or muscle, to make muscle tense or relax, which can achieve some kinds of movement of paralyzed muscles and improve or restore muscle functions. Feedback stimulation can show real-time muscle rms waveform histogram and make feedback stimulation therapy by setting thresholds. Combined with specialized pelvic floor assessment methods, template training methods, multi-media biofeedback training and other therapy programs, it can choose different therapy programs according to different stage of therapy.Rnmain featuresrn1.flexible working modes: neuromuscular electrical, emg triggered stimulation, tens, pelvic floor evaluation and training. Surface emg evaluation and multimedia biofeedback, template training.rn2.restore nerve and muscle connection, relieve muscle spam, and promote muscle function recovery; combine active and passive stimulations to re-control paralyzed muscles;rn3.make use of state-of-the-art surface emg acquisition and analysis technology, get sensitive, accurate and real-time feedback and assist make appropriate assessment and treatment plan;rn4.pelvic floor treatment: help patients to recover early the pelvic floor neuromuscular function;rn5.convenient, multiple and visual training templates; simple, funny and personalized game training make treatment no longer boring;rn6.optional central monitoring program: perfect case management, real-time wireless data transmission, and save data in sd card easily.

to reduce the risk of nerve damage during surgery by monitoring trigger emg activity:rn1. Monitoring trigger emg during surgery;rn2. Various prompts for different emg trigger setting;rn3. To save & replay of electrophysiological waveforms in real time;rn4.to locate nerve and distinguish some special nerve during surgery. Specification:rn1. Hardwarernamplifier channel: 4 channel, 8 channel;rnstimulation current: 0-30ma, stimulation frequency: 1-30hz;rnpulse width:50s, 100s, 150s, 200s, 250s;rnsound & voice prompt for event;rnelectric knife / coagulation available for monitoring with event mark in silence;rnelectrode -off alarming periodically or in a real time;rn2. Monitoring itemrntrigger emg: identify the tissue function and judge nerve;rn3. Alarming or promptrnclinic alarming: alarming (including sound, dialog box and event marking) would come with the physiologic wave reaching the limit;rnprompt: base on the setting, it would make the prompt as reaching the limit, rnsuch as when the electric knife / coagulation is working or when the nervernstimulation make the muscle movement;rntechnique alarming: equipment failure, such as communication or powerrnfailure waveform recording.rn4. Surgery recording:rnwaveform recording: recording typical waveform in different stage ofrnsurgery and the emg response trend;rnevent recording: recording various kind of emg waveform when it reach thernthreshold value set;rn5. Easy software operation:rnwave track: recording typical waveform in different stage of surgery and thernemg response trend;rnevent recording: recording various kind of emg waveform when it reach thernthreshold value.

main features of 7128w-d36-ep 36 channel eegpsgerprnprofessional eeg amplifier suitable for all standard applications of routine eeg and long term eeg monitoring in the research and clinical areas. configurable in a number of setups according to users needsrn24 channels monopolar eeg;rn12 channels monopolar eeg + 12 channels bipolar eeg;rn24 channels monopolar eeg + 12 channels polysomnography (psg) parameters (including ecg (1 channel with 2 leads), airflow (1 channel), eog (2 channels), emg (3 channels), snore (1 channel), spo2 (1 channel), thoracic abdominal breathing (2 channels), body position (1 channel)) + erp examination. 24 bits ad conversion rate, with high sampling rate of up to 8 khz. high quality real-time eeg signal acquisition is transmitted via fiber optical isolation, which shields away interference from power line and other signals, transmitting stable and reliable measurement data at high-speed while greatly ensuring patients safety. amplifier can be operated either by dc power without affecting signal quality. head-box design to access single shielded cupclip electrodes with touch proof connectors (1.5mm). built-in impedance testing function and automatic calibration (for both sine wave and square wave signals). optional video system for recording, editing and displaying video images synchronously with eeg signals. Delivery time 3-5 days after payment confirmed package 1 carton

20 channel ambulatory eeg wireless bluetooth channel: 19 ch eeg + 1 ch ecg; 1. Event button to mark patient's epilepsy seizure; 2. Plug and play single electrode (din interface). Supports 19 eeg channels plus 1 channel ecg to meet with doctor's clinical requirements; low power consumption, capable of supporting up to 72 hours recording with 4 aa batteries; use of dc power supply eliminates risk of electric shock to patients and prevents signal interference, and removes the need to use ground wire or other shielding features; supports real-time eeg waveform recording and display via wireless bluetooth transmission, or dynamic recording with flash memory card capable of storing up to 2gb of eeg data (data storage capability depends fully on memory card used); fast data uploading capability: data stored in flash memory card via dynamic recording can be quickly transmitted to desktop or laptop computer through usb 2.0usb1.1 interface; single electrodes with touch proof connectors that meets international standard, and can be replaced individually if necessary; event button on the amplifier enables on-the-spot manual event marking of patient's epilepsy seizure during recording; compact design and easy to carry, complete with eeg signal isolation to support maximum patient movement without distortion; optional video system for recording, editing and displaying video images synchronously with eeg signals. Package: 1 carton delivery time: 3-5 days after payment confirmed

this is a professional digital eeg device designed and developed to allow cliniciansrnto perform all standard applications of routine eeg and long term eeg monitoring anywhere due to its portable and compact design. Rnit also has low power consumption making it capable of supporting up to 72 hours recording with just four aa batteries. Rnthis device supports real-time eeg waveform recording and display via wi-fi and dynamic recording with flash memory card. Rnkey featurern rn1.compact design portable and easy to carry. Rn2.complete with eeg isolation support maximum patient movement without distortion. Rn3.user-friendly operation. Rn4.low power consumption capable of supporting up to 72 hours recording with fourrnaa rnbatteries. Rn5.supports real-time eeg waveform recording, display via wi-fi. Rn6.dynamic recording with flash memory card. Rn7.all-in-one electrode cable for easy connection. Rn8.use of dc power supply: eliminates risk of electric shock to patientsrn prevents signal interferencern removes the need to use ground wire or other shielding featuresrn rn9.fast data uploading capability stored data in flash memory card can be quickly transferred to the computer through usb2.0/usb 1.1 interface. Rn10.optional video system recording, editing and displaying of video synchronously with eeg signals.

The new NS-SOMNORMAL-3 is a compact and portable device which can be connected to an Android or iOS mobile device to access the mobile application for treatment of Insomnia allowing users to use the device wherever they go. This device uses Cranial Electrotherapy Stimulation (CES), which is a form of a non-invasive brain stimulation that applies a small, pulsed electric current across a person’s head to treat insomnia through electrodes placed on the ear lobes.

 

Clinical Application :

• Insomnia
• Anxiety
• Depression

 

Application Department :

• Neurology
• Psychiatry
• Family Health

The new NS-EEG-D1-W is a professional digital AEEG device available in 16/24/32/64 channels. This device has a compact design making it portable and can be easily carried while also having low power consumption making it capable of supporting up to 72 hours recording with four AA batteries. This device is suitable for all standard applications of routine EEG and long-term EEG monitoring. Supports real-time EEG waveform recording and display via Wi-Fi and dynamic recording with Flash memory card.

 

Integrated Functions :

• Signal magnification
• A/D transform
• Data storage
• LCD display
• Wi-Fi Data Transmission

 

Displays :

• One channel waveform
• Present Time
• Collection Time
• Storage Capacity
• Version Information
• Battery Status

Neuro Rehabilitation device including accessment, game play and training, stimulations. This system consists of electric stimulation and SEMG, and is mainly used for muscles and nerve training.

 

There are 4 modules in this device:

• Contraction: Consists of SEMG Evaluation and Muscle Training test modules.
• Force Measurement: Consists of Force Evaluation/assessment module.
• Grab Release: Consists of Pinch Evaluation, Grab and Release Evaluation and Grab and Release Training modules.
• Stimulation: Consists of TENS, Pre-scripting Stimulation, Free Stimulation, and Feedback Stimulation modules.

 

System Key Features :

• Modern design with 9-inch colored LCD touch screen
• Portable with compact design integrating EMG assessment, examination and therapy
• Digitized muscle strength test and rehabilitative training system for extremities
• Centralized data management system for clinicians’ ease of access to patient’s information
• User-friendly system helps to increase user satisfaction and adoption

key featuresrnsupport both iso & android systemrnpocket-size design & simple operationrnshort treatment period & no side effectrnbluetooth connection to smart phonernprofessional assessment of insomnia, anxiety and depressionrnassessment & treatment data can be saved to cloud rnclinical applicationrnsomnormal can be used for treatment of insomnia, anxiety and depression. Delivery time: 3-5 days after payment confirmed package: 1 carton

key featuresrnsupport both iso & android systemrnpocket-size design & simple operationrnshort treatment period & no side effectrnbluetooth connection to smart phonernprofessional assessment of insomnia, anxiety and depressionrnassessment & treatment data can be saved to cloud rnclinical applicationrnsomnormal can be used for treatment of insomnia, anxiety and depression. Delivery time: 3-5 days after payment confirmed package: 1 carton

The NS-SIOM-1E is a touch-screen, user-friendly intraoperative monitoring system available in 4 or 8 channels, which has wide applications for use during different types of surgery. This device helps reduce the risk of nerve damage during surgery and identify nerve functions before the end of surgery through monitoring of triggered EMG activities in multiple cranial and peripheral nerves. NS-SIOM-1E is applicable for Facial Nerve, Thyroid, Spinal, ENT and other general surgeries.

Hardware Components :

•  IOM Host
• IOM Modular
• Pre-amplifier
• Connection cable
• Accessories