Global Vertex a

Carbon Steel Pipe Carbon steel pipe has a wide range of uses. For example, it is used for low pressure conveyance of gas, water, oil, air steam or other fluids. It is also used in machinery, buildings, sprinkler systems, irrigation systems, and water wells. Product Description Nominal Size - 15mm to 450mm Outside Diameter - 21.7mm to 457.2mm Wall Thickness - 2.8mm to 7.9mm Weight - 1.31kg/m to 87.5kg/m

API ERW & Seamless ERW (Electric Resistance Welded) Pipes are welded pipes where only the edges are heated, thereby creating a more accurate surface. By doing so, pipes up to 0.4m diameter could be achieved more economically. They are used in various engineering purposes, such as agriculture and irrigation, sewage, gas pipelines, LPG and other non-toxic gases, etc Product Description Outside Diameter : 10.3mm to 1625.6mm Wall Thickness : 1.73mm to 31.75mm Weight : 0.36kg/m to 1247.77kg/m

Square (SHS) Square hollow sections are often used for columns, however similarly to RHS sections, they are not often used as beams due to its shape that makes it difficult to bolt to other beams and vice versa.   Product Description Size : 12 x 12mm to 400 x 400mm Wall Thickness : 1.0mm to 16.0mm Weight : 0.339kg/m to 188.0kg/m

Metric Beams Wide Flange Steel Beams, aka W Beam or H Beams, measured in SI (metric) units.   Product Description  Size : 100x 50mm to 900 x 300mm Flange Thickness : 7mm to 37mm Web Thickness : 5mm to 19mm Weight : 9.30kg/m to 307kg/m Depth : 100mm to 918mm Width : 50mm to 303mm

Angle Bar Equal Angle bar equal can be composed into different bearing components with different structures, it can also be used as joint pieces between the components. It is mainly used in a variety of construction structure and engineering structures such as factory, bridges and vehicles as large structure steels; also be used in steel towers and well stand as components.   Product Description Thickness : 2.5mm to 20mm Size : 20 x 20mm to 200 x 200mm Unit Weight : 0.74kg/m to 59.9kg/m

Expanded Metal Expanded metal is a form of metal stock made by shearing a metal plate in a press, so that the metal stretches, leaving diamond-shaped voids surrounded by interlinked bars of the metal. The most common method of manufacture is to simultaneously slit and stretch the material with one motion. Expanded metal is used in grates, outdoor furniture (e.g. benches), fencing, installation of heating floor system, plastering (metal lath). It is often used also for guarding to prevent contact with hot surfaces or machinery. Details Nominal Size of Mesh : (SWM) 10mm to 36mm / (LWM) 21mm to 101.6mm Thickness : 0.5mm to 8.0mm Strand Width : 1.5mm to 9.0mm Weight : 1.24kg/m 2 to 31.4kg/m 2 Sheet Size : 2440mm (SWM) x 1220mm (LWM)