Our Products #6017318

This printhead 5113 is designed for Epson StomJet TC1932 printers and suitable to a range of chinese printers. This is the original Epson part (number FA16021). This printhead is available as a second locked or unlocked versions. The exact version needed is related to each printer.

The Epson 5113 can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency is 17.8 Khz.

It is a new generation print head that allows fast speed, high resolution printing with water-based dye and pigment inks. The Epson 5113 original print head is delivered in a sealed Epson package.

Product Specifications

Technology: Micro-Piezo

Native resolution: 3200 dpi

Min. droplet size: 1.5 pico litre

Max. droplet size: 21 pico litre

Tot. amount of nozzles: 3200 (8 lines x 400 nozzles)

Firing frequency: 17.8 Khz

Ink compatibility: water-based dye and pigment inks

This Epson DX2 original, solvent resistant printhead is suitable for Mutoh and Mimaki DX2 printers, as well as some Epson printers. This is the original Epson DX2 solvent black printhead, delivered in a sealed Epson original package with head ID. Mutoh part number is DE-49733, Mimaki refers to the printhead as IJ1280A-001 and Epson part number is F056011.

this printhead assy is suitable for the mimaki ujv / jfx / ujf-706 printers. This is the original mimaki part (number m018821 replacing kx-ce308644cs-ce4). This part does not include the metallic bracket that can be easily re-used from the previous head.

product specifications

technology: multi-drop grayscale micro-piezo

grayscale levels: 16

active nozzles: 318

print swathe width: 53.6 mm

nozzle pitch: 169 m

native resolution: 150 dpi

printhead weight: 148 g

dimensions: 85 x 70 x 23 mm

drop volume: 6 - 90 pl

typical firing frequency: 2.8 - 28 khz

ink compatibility: oil-based pigment ink and uv curable pigment ink

The Konica Minolta KM1024 SHB print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 SHB print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 SHB print head has 1024 nozzles with a droplet size of 6 pico litre and a native resolution of 360 dpi. The print head has an integrated heater, which makes it ideal for UV inks, but suitable for solvent inks as well. This print head is also known as the Konica Minolta KM1024 SHB. This is Konica original print head and it includes the Head ID and the necessary waveform information. It carries a product warranty.

Specifications

Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle)

Native Resolution: 360 dpi

Cal. Droplet Size: 6 pico litre

Max. Drops in Greyscale: 8 drops

Tot. Amount of Nozzles: 1024 (512 nozzles per line)

Nozzle Spacing: 70.5 microns

Print Width: 72 mm

Firing Frequency: 26 kHz

Ink Compatibility: UV and Solvent Inks

Heater: integrated

This Head-CONT Board Assy is suitable for Mutoh Albatros printers. This is the original Mutoh part (number EA-3B515).

This Assy Feeder Sensor Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105740).

This Assy, Head Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 6700105020).

This HV CONT Board Assy (for 110V) is suitable for Mutoh Albatros printers. This is the original Mutoh part (number EA-3B528).