Polytech Instruments Asia Pte. Limited

Singapore

We are offering esm301/esm301l motorized test stands with pc control. Now available with three new features: preload, load holding, & break detection the esm301 and extended length esm301l are highly configurable motorized test stands for tension and compression testing applications up to 300 lbf (1.5 kn) for laboratory and production environments. the stands can perform a wide range of tests, including break testing, cycling, limit testing to a load or distance, load holding, elongation testing, tensile testing, compression testing, and more. Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload, and many other functions. The stands can be controlled via its console or pc. functions are offered individually through a unique "build-your-own" configuration platform. Order any combination of functions to customize the stand to specific requirements. Functions not ordered originally can be activated in the field. a password can be set to protect against unauthorized changes. Modular mechanical design allows the test frame and controller to be separated for various mounting configurations.

We are offering advanced digital force gauges. Series 5 advanced digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 1, 000 lb (0.5 n to 5, 000 n). The gauges feature an industry-leading sampling rate of 7, 000 hz, producing accurate results even for quick-action tests. Accuracy is 0.1% of full scale, and resolution is 15000. A large, backlit graphics lcd displays large, legible characters, while the simple menu navigation allows for quick access to the gauges many features and configurable parameters. Data can be transferred to a pc or other data collector via usb, rs-232, mitutoyo (digimatic), or analog outputs. on-board data memory for up to 1, 000 readings is included, as are statistical calculations and output to a pc. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. the series 5s averaging mode addresses the need to record the average force over time, useful in applications such as peel testing, while external trigger mode makes switch activation testing simple and accurate. An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. series 5 force gauges are directly compatible with mark-10 test stands, grips, and software. the gauges include mesurtm lite data acquisition software. Mesurtm lite tabulates continuous or single point data. One-click export to excel allows for further data manipulation.

We are offering professional digital force gauges. series 7 professional digital force gauges are designed with a number of sophisticated features for the most demanding tension and compression measurement applications, up to 500 lbf (2500 n). The gauges feature 0.1% accuracy and a blazingly fast, industry-leading sampling rate of 14, 000 hz, producing reliable results for extremely quick-action tests. series 7 gauges include all the functions of series 5 gauges, with several additional features, including high speed continuous data capture and storage, with memory for up to 5, 000 readings, at an acquisition rate of up to 14, 000 hz. The gauges also feature programmable footswitch sequencing, break detection, and 1st 2nd peak detection. Series 7 includes a coefficient of friction unit of measurement and user-defined unit of measurement. For productivity enhancement, the gauges also feature automatic data output, data storage, and zeroing functions upon the completion of break detection, averaging, external trigger, and 1st 2nd peak detection. series 7 force gauges are directly compatible with mark-10 test stands, including the esm301, to permit functions such as break testing, tensile testing, compression testing, dynamic load holding, pc control capability, and many other applications. the gauges include mesurtm lite data acquisition software. Mesurtm lite tabulates continuous or single point data. One-click export to excel allows for further data manipulation.

We are offering reflection densitometers. The iq 150200 densitometeris engineered with the latest insoftware technology and is soeasy to use that the operatorsmanual isnt even needed! yet, these affordable densitometersfulfill your press quality controlneeds with precision. Thesophisticated optical systemwas designed for accurate andrepeatable density readings of3mm colorbar targets. A smallaperture optical system is alsoavailable for measuring narrowcolorbars down to 1.6mm.

We are offering tbx black & white transmission densitometer. The tobias tbx densitometer measures diffuse transmission densities of blackand white films used in graphic arts, photography, x-ray, microfilm, and scientificapplications. The capability of reading up to 6.0d allows the unit to measuredensities of the darkest films. The tbx has been designed for user convenience anderror-free measurement. Table illumination facilitates film placement. When thefilm sample is placed over the table aperture and the probe depressed, densityreadings are displayed on a 7-segment led. A null switch permits densitydifference readings to be made. A standard serial rs-232 port provides outputconnection to a printer, computer, or process control system.

We are offering advanced motorized torque test stand model tstm-dc / tstmh-dc. the tstm-dc advanced motorized torque test stand offers all the mechanical specifications of the tstm motorized test stand, including 100 lbfin (11.3 nm) torque capacity, versatile modular design, quick engagement and disengagement of samples, fixture mounting plate, stepper motor design that prevents speed variation with load, and more. the tstm-dc offers expanded capabilities, including full pc control, programmable angle limits, programmable cycling, auto return, password protection, and other features.

We are offering ministrip high precision stripping tool. The innovationthe all new cable stripping tool nitronic ministrip was developed for thin cables. It features a patented four-blade system, which provides accurate and exactly repeated stripping of cables. the costing is removed by cutting with rotating blades and strip-off in one single step. This innovative procedure allows processing of fiberoptic cables as well as coax and teflon coated cables. The high precision avoids damage to wires or fibers. precision blade diameter control with a micrometer scale, allows a quick set-up of diameter. The locking screw of the diameter adjusting system makes the tool available even for military applications (mil-spec.). The high quality of the product guaranties a precise repetitiveness. features wire size range from 0.16mm (0.006) to 1.5mm (0.006) (15-34 awg) depending on isolation type down to 0.10mm (0.004) awgouter cable diameter max. 2.5mm (0.1)stripping length up to 15mm (0.6)four cutting blades on one planerotating cutno wire damagefast and easy change of length and diametermobile, no power supplyhss blades replaceable by user without toolssuitable for teflon, pvc, kynar and kapton isolationsattractive price accessory titan coated carbide blades for special applicationsbench clamp for production use swiss madethe ministrip is developed and manufactured in switzerland by nitronic. For more than 20 years, nitronic develops electronicalmicroelectronical controls and mechanical solutions for cable treatment. The nitronic ministrip is a world novelty. There is no comparable product on the market!

We are offering stripping and twisting machine. the all new cable stripping and twisting machine st215 was specially developed for thin cables. It features a four-blade system, which provides accurate and exactly repeated stripping of cables. the coating is removed by cutting with rotating blades and strip-off in one single step. This innovative procedure allows processing of microcoax cables as well as teflon or kapton coated cables. Furthermore, wires are twisted during the stripping process. The high precision avoids damage to wires or dielectric. In addition, a centering unit allows very high precision stripping for high-end applications. The centering unit is infinitely adjustable and assures that the cable is centered respectively to the cutting blades. User influences regarding the stripping quality are eliminated. precision blade diameter control with a micrometer scale, allows a quick set-up of diameter. The locking screw of the diameter adjusting system makes the machine available even for military and aerospace applications. The quick length control is equipped with a sensor which initiates the stripping process. The high quality of the product guaranties a precise repetitiveness. in addition, the st215w features an adjustable wayback. This function will open the blades a little prior to pull-off. This increases the stripping quality, especially when the wires have important diameter tolerances. furthermore, the rotation of the stripping head can be stopped prior to pull-off. This allows to twist or not the strands. featureswire size range from 0.08 mm(0.003) to 2.0 mm(0.08) (12-40 awg)depending on wire type down to 0.025 mm (0.001) or 50 awgouter cable diameter max 2.5 mm (0.1)stripping length up to 13 mm (0.5)adjustable diameter feed ratefour cutting blades on one planesensor activated start cycleair nozzle against cable restswayback (st215w only)foot pedal activated start cycle (optional)left or right rotationtwistingfast and easy change of length and diametersuitable for microcoax cables and teflon, kapton isolation100-230v power supply, 5 to 12 bar compressed air options foot pedalmicro filter for compressed air swiss madethe st215 st215w is developed and manufactured in switzerland by nitronic. She is a world novelty; there is no comparable product on the market.

We are offering coax cable stripping machine. the st730 meets all the requirements for a flexible wire processing machine. Challenging stripping of coax- or triaxial cable is breeze for the st730 to handle. Of course, multi-conductor cable or single wire special insulation such as kapton or teflon can also be processed. The handling is very easy: insert the cable and the sensor will start the stripping cycle. The st730 strips the outer jacket, the shield as well as the dielectric within seconds very precisely. set up times are practically eliminated because when selecting stored cable parameters the machine sets itself up. The job is further simplified through the build in counter and the ability of setting sequences. The intuitive operation allows for quick and reliable machine setting when changing to a different cable. Stripping parameters can be protected by selecting a password through authorized personnel. the stripping machine st730 impresses, due to its high quality workmanship, longevity and guaranties the highest flexibility with sustained productivity! features outer cable diameter max. 7mm (0.028), resolution 0.01mmstripping length max. 30mm (1.18), resolution 0.1mmspecial operations partial stripwaybacktwisting of wire strandsup to 9 steps diameter feed rate programmablestart cycle with sensoror foot pedal (optional)clamping force adaptiveinterface rs232dimensions (lwh) 435165180 mmweight 8.4kgpower supply 100, 115 or 230vac optionswincoax software for data backup and visualizationfoot pedal swiss made the st730 is developed and manufactured in switzerland by nitronic ag. For more than 20 years, nitronic develops electronical microelectronical controls and mechanical solutions for cable treatment.

We are offering stiffness tester. precision instrument evaluates material stiffness. the taber stiffness tester utilizes a two directional pendulum-typeweighing system to evaluate material stiffness, flexural strength, resiliency and elasticity properties. Force is applied to the lowerend of the specimen by a pair of rollers attached to the driving disc. the resulting torque tilts the pendulum from its vertical position anda taber stiffness unit reading (gcm) is taken automatically whenthe pendulum mark aligns with the appropriate driving disc mark(712 or 15). Predetermined sample length, deflection angle andrate of loading provide accurate and reproducible test results. onboard computer automates testing. a high resolution optical encoder and a non-contacting photosensor are incorporated to make this instrument fully automatic. the onboard computer calculates and records testing data(average; standard deviation; highlow; time; date; and auser-defined label), and converts stiffness readings to theappropriate user selected stiffness range. Test results aredisplayed on a 4 x 20 character display screen, and can beprinted, stored or downloaded to a pc. test a wide range of products. nine distinct setups permit the testing of very delicate to extremelyrigid materials. Taber stiffness testers will evaluate paper, lightmetallic foil, laminated plastic, cardboard, wire, and other flexiblematerials up to 5.5mm (0.219 inches) thick that do not exceed10, 000 taber stiffness units.

We aree offering linear abraser. measure abrasion resistance and other material propertiesof finished products of any size or shape flat, concave orconvex. the linear abraser uses a free-floating head to follow the contoursof every sample, permitting testing of finished products. With virtuallyno limit on sample size or shape, the linear abraser is ideal for testingconsumer products, automotive components, painted parts, printedgraphics, optical products, rubber, leather, textiles, and for use intesting laboratories. versatile testing with a single, rugged, durable machine. with adjustable stroke length, speed, load, and a wide selectionof taber attachments, the linear abraser allows you to customize testparameters to your exact needs. Optional attachments can be used toperform scratch, coin scrape, crockmeter, rub, pencil hardnessscratch, paperclip mar, magnetic stripe abrasion, wire insulationscrape, chemical rub, plus custom testing. maintain consistent testing standards with tabersworld-famous abrasives. the linear abraser abrades with a wearaser. The size and shapeof a pencil eraser, the wearaser uses the same high-quality taberabrasive media found in our world-famous wheels so youre assuredof consistent test results.

We are offering rotary abraser. Taber abrading wheels produce characteristic rub wear action. Mounted to a rotating turntable, specimens are subjected to therub-wear action of two abrasive wheels. Driven by the test sample, the wheels produce abrasion marks that form a pattern of crossedarcs over a circular ring approximately 30 square centimeters. Thisreveals abrasion resistance at all angles relative to the weave orgrain of the material. Referenced in numerous international test standardsand specifications. Simple to operate, this instrument has been accepted worldwideas a standard for wear and abrasion research, quality and processcontrol, materials evaluation, and product development. Taber rotaryabrasers are capable of providing reliable data in a matter of minutes, compared to the years that may be required with in-use testing. Test a wide range of products. The taber abraser can be used to test virtually any flat specimen. Itsfield of application has included tests of: painted, lacquered, powdercoated, and electroplated surfaces; textile fabrics ranging from sheersilks to heavy upholstery and carpeting; and solid materials such asmetals, stone and ceramics. Other materials include paper, glass, plastics, leather, rubber, linoleum, laminates, plus many others.