Post Buy Requirement
Global Vertex

Global Vertex
location a, Singapore

Write a Review

Our Products

  1. Steel & Steel Products 3 Products available
  2. Beams And Girders

    2 Products available
  3. Hollow Sections

    2 Products available
  4. Hardware Fittings And Accessories

    2 Products available
  5. Steel Pipes & Tubes

    2 Products available
  6. Steel Plates, Sheets, Bars & Rods

    1 Products available
  7. Steel Plates

    1 Products available
  8. Steel Round Bars

    1 Products available
  9. Marine Equipment

    1 Products available
  10. Metal Products

    1 Products available
  11. Others Products 3 Products available

Our Products

Steel Unequal Angles

Angle Bar Unequal Angle bar unequal is angled steel with different side length. Main application of large type angle bar unequal is mainly for workshops, bridges and vehicles; middle type angle bar unequal is used in construction structure and iron stand, and small angle bar unequal works as structural components.

 

Product Description

  • Size : 65 x 40mm to 200 x 150mm
  • Thickness : 4mm to 18mm
  • Weight : 3.2kg/m to 47.10kg/m
View Complete Details

Steel Flat Bars

Flat Bar Steel flat bar is widely used for all general fabrication and repairs in industrial maintenance, agricultural implements, transportation equipment, etc.

 

Product Description

  • Section Size : 3 x 12mm to 25 x 300mm
  • Weight : 0.283kg/m to 58.90kg/m
View Complete Details

Steel Imperial Beams

Imperial Beams Wide Flange Steel Beams, aka W Beam or H Beams, measured in Imperial (inch-pound) units.

 

Product Description

  • Size : 102 x 102mm to 914 x 305mm
  • Flange Thickness : 8.76mm to 34.54mm
  • Web Thickness : 7.11mm to21.08mm
  • Weight : 19.35kg/m to 313kg/m
  • Depth : 105.7mm to 913.9mm
  • Width : 103.1mm to 309.4mm
View Complete Details

Steel U Type Channels

Channel Bar Channel bar is a channel shape with inside radius corners that is ideal for all structural applications where greater strength and superior corrosion resistance is required. Widely used for all types of fabrication projects that are exposed to the elements  chemical, acidic, fresh water, and salt water environments.

Product Description

  • Size : 50 x 25mm to 380 x 100mm
  • Thickness : 3.5mm to 13.0mm
  • Weight : 2.56kg/m to 62.0kg/m
View Complete Details

Welded Steel Pipes

Welded Pipe Welded pipe is an electric welded round pipe that is an alternative to steel pipes. It is a structural grade tube that is suitable for a wide variety of applications where dimensional accuracy and precision tolerances is not a primary concern.A raised weld seam is present inside the pipe.

 

Product Description

  • Nominal Size : 15mm to 150mm
  • Outside Diameter : 21.0mm to 166.1mm
  • Calculated Weight : 0.236kg/ft to 21.30kg/ft
  • Wall Thickness : 3.2mm to 5.4mm
  • Class : Extra Light (AA) to Heavy (C)
View Complete Details

Seamless ERW Steel Pipes

API ERW & Seamless ERW (Electric Resistance Welded) Pipes are welded pipes where only the edges are heated, thereby creating a more accurate surface. By doing so, pipes up to 0.4m diameter could be achieved more economically. They are used in various engineering purposes, such as agriculture and irrigation, sewage, gas pipelines, LPG and other non-toxic gases, etc

Product Description

  • Outside Diameter : 10.3mm to 1625.6mm
  • Wall Thickness : 1.73mm to 31.75mm
  • Weight : 0.36kg/m to 1247.77kg/m
View Complete Details

Steel Metric Beams

Metric Beams Wide Flange Steel Beams, aka W Beam or H Beams, measured in SI (metric) units.

 

Product Description 

  • Size : 100x 50mm to 900 x 300mm
  • Flange Thickness : 7mm to 37mm
  • Web Thickness : 5mm to 19mm
  • Weight : 9.30kg/m to 307kg/m
  • Depth : 100mm to 918mm
  • Width : 50mm to 303mm
View Complete Details

Steel Ship Plates

Ship Plate Steel ship plates are used in the cabin structures of cruise ships. The especially thin but wide plates are used for such applications to offer the best processing properties such as flatness and weldability. In contrast, high-strength, thermomechanically rolled ship plates are used in offshore applications. They are used for platform superstructures or for special ships in the oil and gas industry.

 

Product Description

  • Thickness : 6mm to 50mm
  • Width : 8² x 30²
  • Weight : 4.376kg/ft to 36.46kg/ft
View Complete Details

Steel Square Bars

Square Bar Square Bar is widely used throughout the fabrication industry: frame work, braces, trim, shafts, axles, fittings, instruments, gym equipment, awnings, structures, and more.

 

Product Description

  • Size : 8mm to 160mm
  • Section : 0.64cm to 256cm
  • Weight : 0.502kg/m to 201kg/m
View Complete Details

Expanded Metal Plates

Expanded Metal Expanded metal is a form of metal stock made by shearing a metal plate in a press, so that the metal stretches, leaving diamond-shaped voids surrounded by interlinked bars of the metal. The most common method of manufacture is to simultaneously slit and stretch the material with one motion. Expanded metal is used in grates, outdoor furniture (e.g. benches), fencing, installation of heating floor system, plastering (metal lath). It is often used also for guarding to prevent contact with hot surfaces or machinery.

Details

  • Nominal Size of Mesh : (SWM) 10mm to 36mm / (LWM) 21mm to 101.6mm
  • Thickness : 0.5mm to 8.0mm
  • Strand Width : 1.5mm to 9.0mm
  • Weight : 1.24kg/m2 to 31.4kg/m2
  • Sheet Size : 2440mm (SWM) x 1220mm (LWM)
View Complete Details

Steel Equal Angles

Angle Bar Equal Angle bar equal can be composed into different bearing components with different structures, it can also be used as joint pieces between the components. It is mainly used in a variety of construction structure and engineering structures such as factory, bridges and vehicles as large structure steels; also be used in steel towers and well stand as components.

 

Product Description

  • Thickness : 2.5mm to 20mm
  • Size : 20 x 20mm to 200 x 200mm
  • Unit Weight : 0.74kg/m to 59.9kg/m
View Complete Details

Steel Lipped Channels

Lipped Channel (Purlin) Lip channels are predominantly used as a structural component when erecting or constructing buildings and structures. This has also lead to lip channels quite often being referred to as purlins. Though this may be the main use, cold formed steel lip channels are used for other industries such as racking and shelving, trailer manufacturing and many more make use of lipped channels.

Product Description

  • Size : 60 x 30 x 10mm to 250 x 75 x 25mm
  • Thickness : 1.6mm to 4.5mm
  • Weight : 1.63kg/m to 14.90kg/m
View Complete Details

Steel Deformed Bars

Deformed Bar Deformed bar, also known as rebar (short for reinforcing bar), is a steel bar or mesh of steel wires used as tension devices in reinforced concrete and reinforced masonry structures to strengthen and hold the concrete in tension. Deformed bars surface is often patterned to form a better bond with the concrete.

 

Product Description

  • Size : 9mm to 50mm
  • Weight : 0.5kg/m to 15.43kg/m
View Complete Details

Steel Plain Plates

Steel Plate and Sheet Steel Plate/Sheet is a structural quality steel plate used for a large variety of general construction and industrial applications.

 

Product Description

  • Thickness : 1.2mm to 100mm
  • Dimension : 4² x 8² to 8² x 20²
  • Weight : 0.875kg/ft to 72.930kg/ft
View Complete Details

Square Hollow Section Pipes

Square (SHS) Square hollow sections are often used for columns, however similarly to RHS sections, they are not often used as beams due to its shape that makes it difficult to bolt to other beams and vice versa.

 

Product Description

  • Size : 12 x 12mm to 400 x 400mm
  • Wall Thickness : 1.0mm to 16.0mm
  • Weight : 0.339kg/m to 188.0kg/m
View Complete Details

Carbon Steel Pipes

Carbon Steel Pipe Carbon steel pipe has a wide range of uses. For example, it is used for low pressure conveyance of gas, water, oil, air steam or other fluids. It is also used in machinery, buildings, sprinkler systems, irrigation systems, and water wells.

Product Description

  • Nominal Size - 15mm to 450mm
  • Outside Diameter - 21.7mm to 457.2mm
  • Wall Thickness - 2.8mm to 7.9mm
  • Weight - 1.31kg/m to 87.5kg/m
View Complete Details

Rectangular Hollow Section Pipes

Rectangle (RHS) Rectangular Hollow Sections are commonly used in welded steel frames where members experience loading in multiple directions.

 

Product Description

  • Size : 19 x 9mm to 400 x 300mm
  • Wall Thickness : 1.0mm to 16.0mm
  • Weight : 0.401kg/m to 163.00kg/m
View Complete Details

Steel Chequered Plates

Chequered Plate Chequered plates are used in many fields, the most popular being tread plate. The new and modern use is as architectural metal materials used in wall and ceiling cladding. It is also used as decoration and protective sheets in some designs of doors, chairs, furniture and industrial uses.

Product Description

  • Thickness : 2.3mm to 12.0mm
  • Width : 4² x 8² and 5² x 10²
View Complete Details

Steel Round Bars

Round Bar Steel Round Bar is a hot rolled, mild steel solid steel bar that is ideal for all general fabrication, manufacturing and repairs. They are widely used in industrial maintenance, agricultural implements, transportation equipment, ornamental iron work, fencing, artwork, etc.

 

Product Description

  • Diameter : 6mm to 300mm
  • Weight : 0.222kg/m to 555kg/m
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

if(jQuery('.js-dynamic-height').length){ }