Bitumen Emulsion Ms-65

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 150 Metric Ton

We offer liquid bitumen.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 300 Metric Ton
Black In colour Cationic emulsion

When asphalt is milled into microscopic particles and dispersed in water with a chemical emulsifier, it becomes an asphalt emulsion. The tiny droplets of asphalt remain uniformly suspended until the emulsion is used for its intended purpose. In the emulsion state, the emulsifier molecules orient themselves in and around droplets of asphalt. The chemistry of the emulsifierasphaltwater system determines the dispersion and the stability of the suspension. When emulsions are used in the field, the water evaporates into the atmosphere, and the chemical emulsifier is retained with the asphalt.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 200 Metric Ton

emulsions applications
surface dressing- cationic emulsions for surface dressing are 70% binder content, applied hot (80-90c), or 6065% binder content, applied cold. the emulsion must set rapidly to anchor the chippings to the road surface

slurry seal 60% slow setting mixes, open-graded 60% medium setting mixes, dense-graded 60% slow setting penetration macadam. slurry sealing is a technique for road repair in which a fluid mix of finely grained aggregate bitumen emulsion and water is applied to the road surface. on the road this slurry sets quickly to provide a new wearing surface, (the seal). the thickness of the seal is normally 2-15 mm (can be up to 40 mm) and the final surface has a texture, wearing and load bearing characteristics similar to those of fine cold asphalt, depending on the aggregate and grading used. the seal is impenetrable to water and so ensures protection against ingress of water and is ideal for sealing existing surfaces which are cracked, fissured or pitted. the seal also provides a contribution to riding quality (noise reduction) and an improved resistance to skidding.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Biutmen Emulsion Ms 57

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 200 Metric Ton

CATIONIC EMULSIONS
When asphalt is milled into microscopic particles and dispersed in water with a chemical emulsifier, it becomes an asphalt emulsion. The tiny droplets of asphalt remain uniformly suspended until the emulsion is used for its intended purpose. In the emulsion state, the emulsifier molecules orient themselves in and around droplets of asphalt. The chemistry of the emulsifierasphaltwater system determines the dispersion and the stability of the suspension. When emulsions are used in the field, the water evaporates into the atmosphere, and the chemical emulsifier is retained with the asphalt.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Cationic Emulsion

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 200 Metric Ton

cationic emulsions
when asphalt is milled into microscopic particles and dispersed in water with a chemical emulsifier, it becomes an asphalt emulsion. the tiny droplets of asphalt remain uniformly suspended until the emulsion is used for its intended purpose. in the emulsion state, the emulsifier molecules orient themselves in and around droplets of asphalt. the chemistry of the emulsifierasphaltwater system determines the dispersion and the stability of the suspension. when emulsions are used in the field, the water evaporates into the atmosphere, and the chemical emulsifier is retained with the asphalt.
image came into general use in pavement applications. their early use was in spray applications and as dust palliatives. the growth in the use of asphalt emulsions was relatively slow, limited by the type of emulsions available and a lack of knowledge as to how they should be used. continuing development of new types and grades, coupled with improved construction equipment and practices, now gives a broad range of choices. virtually any roadway requirement can be met with emulsions. judicious selection and use can yield significant economic and environmental benefits.emulsions are less hazardous to use and can be applied in a wider range of conditions.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion - Oxidized

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 100 Metric Ton
Bitumen Emulsion Bitumen Asphalt
Color Black
Brand Name ALFA

We are offering bitumen emulsion.

bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion - Asphalt

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 100 Metric Ton
Bitumen Specificaiton Bitumen Emulsion
Color Black
Brand Name ALFA

We are offering bitumen emulsion astm d244.
bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drumns

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion K1-40

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 100 Metric Ton

We are offering bitumen emulsion k1-40.
Bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion Rs1-k

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 100 Metric Ton

We are offering bitumen emulsion rs1-k.
Bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.

uses

cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion Rs2k Supply

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 100 Metric Ton

We are offering bitumen emulsion rs2k.

description
bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.

uses

cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion Asia Export

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 100 Metric Ton

We are offering bitumen emulsion. In order for the prime coat to satisfy these functions, some asphalt must penetrate into the base. Prime coats generally are being used less frequently, particularly when the total asphalt thickness is 100 mm (4 in.) or greater. With increased asphalt thickness, there is less possibility of surface water penetration into and pavement slippage on the base. A prime coat should be considered, however, when a granular base is to be carried through an extended period, such as the winter months, or when to be exposed to abrasion damage by traffic. Even though some engineers question the benefits of priming, it should be considered when any doubts exist about the results if it were eliminated.

in the past, the asphalt for prime coating was usually a low viscosity, medium or rapid curing (mc or rc) cutback asphalt. The use of asphalt emulsions is increasing and new emulsion grades have been developed for priming. Ss-1, ss-1h, css-1 and css-1h can be used.

the emulsion grade andor technique selected to replace cutback asphalt for a penetrating prime will depend upon a number of factors. The amount and size of voids in the base material will influence emulsion penetration and determine the emulsion grade, application rate, dilution, and if multiple applications and mixing are required.

when the base surface consists of fine grained materials, those passing the 75-m (no. 200) sieve, the surface will act as a filter and not let the emulsion asphalt particles penetrate. Dampening the surface andor the adding surfactants cannot overcome the filtering action. Being a mechanical problem, it requires a mechanical solution. Therefore, the surface may need to be loosened by scarifying and the emulsion mixed to a specific depth for an acceptable prime.

emulsions for priming almost always require dilution with water. The dilution rates normally have ranged from 1:1 to 10:1 (water to emulsion) dependent upon the base material characteristics and method of treatment. The application rates can vary for a 1:1 diluted emulsion from as low as 2.3 lm2 (0.5 galyd2) for high fines and tight bases and up to 6.8 lm2 (1.5 galyd2) for loose sands and very porous surfaces. In very dense
material, it may be necessary to use a higher dilution and make multiple applications at lower rates. This is done to improve penetration and prevent runoff and puddling of the emulsion.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 150 Metric Ton

a tack coat is a very light spray application of diluted asphalt emulsion. it is used to create a bond between an asphalt overlay being placed and the existing surface. a tack coat is recommended for all overlays. the only possible exception might be when an additional course is placed within two to three days on a freshly-laid asphalt surface.

asphalt emulsions commonly used for tack coats are diluted ss-1, ss-1h, css-1 and css-1h. the emulsion is diluted by adding an equal amount of water. a test dilution is recommended to be certain that the water to be used is compatible with the emulsion. to prevent premature breaking, the water always is added to the emulsion and not the emulsion to the water. if practical, warm water is preferred for dilution. the diluted material typically is applied at a rate of 0.25 - 0.70 lm2 (0.05 - 0.15 galyd2). tack coat should be applied only to an area that can be covered by the same days paving.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Rc-3000 cutback bitumen ( liquid bitumen )

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 200 Metric Ton
Brand Name Alfa BIPL
Model Number Bitumen RC
Place of Origin Singapore

We offer cutback bitumen ( liquid bitumen ) is bitumen that is dissolved in a solvent . Typical solvents include naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the cutback bitumen. The advantage cutbacks have over emulsions is a much higher residual bitumen percent, typically over 80% compares with over 40-65% for bitumen emulsions. The result is more bitumen left on the roadway after curing, for the same volume of binder applied.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Cutback Asphalt RC 800

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 150 Metric Ton
Brand Name Alfa BIPL
Model Number RC 800
Place of Origin Singapore

Cutback Bitumen ( Liquid Bitumen ) is Bitumen that is dissolved in a solvent . Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen.

The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion MS-60

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 200 Metric Ton

We offer

bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Asphalt Emulsion Sales

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 150 Metric Ton

An asphalt emulsion consists of three basic ingredients: asphalt, water, and an emulsifying agent. On some occasions, the emulsion may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives. The blending of asphalt and water is the same as an auto mechanic trying to wash grease from his hands with only water. Only with a detergent or soapy agent can grease be successfully removed. The soap particles surround the globules of grease, break the surface tension that holds them, and allow them to be washed away.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Asphalt Emulsion Suppliers

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 150 Metric Ton

When asphalt is milled into microscopic particles and dispersed in water with a chemical emulsifier, it becomes an asphalt emulsion. The tiny droplets of asphalt remain uniformly suspended until the emulsion is used for its intended purpose. In the emulsion state, the emulsifier molecules orient themselves in and around droplets of asphalt. The chemistry of the emulsifierasphaltwater system determines the dispersion and the stability of the suspension. When emulsions are used in the field, the water evaporates into the atmosphere, and the chemical emulsifier is retained with the asphalt.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

MS-60 Bitumen emulsion

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 200 Metric Ton
Model Number MS-60
Place of Origin Singapore

Bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Asphalt Emulsion RS 57

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 200 Metric Ton
Brand Name Alfa BIPL
Model Number Bitumen RC
Place of Origin Singapore

Asphalt emulsion rs 57 anionic, non-ionic and cationic emulsifiers are all available, which will successfully emulsify bitumen and provide storage stable emulsions. Cationic emulsifiers offer additional advantages, which arise from the fact that most naturally occurring aggregates are negatively-charged in aqueous media, and have a capacity to absorb cationic emulsifiers. Choice of emulsifier type, and emulsion formulation enables the rate of breaking of the emulsion to be controlled. The emulsifiers remain in the cured seal and are concentrated at the interface between bitumen and aggregate and act as antis tripping agents.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 100 Metric Ton

We are offering bitumen emulsion
bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.

uses

cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30Days

View Complete Details

Ask Latest Price & Details

Asphalt Emulsion

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 200 Metric Ton

an asphalt emulsion consists of three basic ingredients: asphalt, water, and an emulsifying agent. on some occasions, the emulsion may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. it is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives. the blending of asphalt and water is the same as an auto mechanic trying to wash grease from his hands with only water. only with a detergent or soapy agent can grease be successfully removed. the soap particles surround the globules of grease, break the surface tension that holds them, and allow them to be washed away.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion RS-50

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 150 Metric Ton

Description

Bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives.

Uses

Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion MS-57

We offer bitumen emulsion consists of three basic ingredients: bitumen, water.

View Complete Details

Ask Latest Price & Details

Bitumen Emulsion

83.50 /2 Metric Ton

Get Latest Price

Min. Order (MOQ) 500 Metric Ton

Alfa coat pf4 bitumen paint is low viscosity blend of selected hard grade bitumen in solvent which dries to form a high quality tough bitumen film.

application
as vapour barriers, damp proof courses, linings to potable water tanks and pipes to provide a continuous barrier to the passage of water and water vapour. Corrosion protection to metal surfaces such as i beam for piling, steel piles and drinking water tanks etc.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : Steel Drums

Delivery Time : 30 Days

View Complete Details

Ask Latest Price & Details

Exporters India

Benzene International Pte Ltd.

Industrial Chemicals

Bitumen Emulsion Ms-65

Bitumen Emulsion

Bitumen Emulsion

Biutmen Emulsion Ms 57

Cationic Emulsion

Bitumen Emulsion - Oxidized

Bitumen Emulsion - Asphalt

Bitumen Emulsion K1-40

Bitumen Emulsion Rs1-k

Bitumen Emulsion Rs2k Supply

Bitumen Emulsion Asia Export

Bitumen Emulsion

Rc-3000 cutback bitumen ( liquid bitumen )

Cutback Asphalt RC 800

Bitumen Emulsion MS-60

Asphalt Emulsion Sales

Asphalt Emulsion Suppliers

MS-60 Bitumen emulsion

Asphalt Emulsion RS 57

Bitumen Emulsion

Asphalt Emulsion

Bitumen Emulsion RS-50

Bitumen Emulsion MS-57

Bitumen Emulsion

Contact Us